柴油叉车

  Home > Products > 柴油叉车

1.5 吨柴油叉车

Specification 1 Manufacturer       LTMA
2 Model       Power shift T/M FD15
3 Load capacity     kg 1500
4 Load center      mm 500
5 Power unit         diesel
6 Operator type        Driver/seat
7 Tire type       Pnenumatic
8 Wheel   Front/rear    2/2
Dimensions 9 Max. lifting height     mm 3000
10 Free lift     mm 155
11 Fork size   L×W×T mm 920*100*35
12 Tilt range   Mast forward/backward  deg 6/12
13 Overall length(without fork)       mm 2245
14 Total width       mm 1070
15 Mast height ( fork lowering)     mm 1995
16 Overall height fork raised ( with backrest)     mm 4030
17 Height to head guard     mm 2060
18 Turning raduis(outside)      mm 2040
19 Front face of fork to front axle     mm 395
20 Min. right angle stacking aisle     mm 2435
Performance 21 Speed Max Travelling   full load km/h 14
no load km/h 14.5
22 Lifting full load mm/s 440
no load mm/s 500
23 Lowering full load mm/s 370
no load mm/s 530
24 Max.drawbar pull    full/no load Kg 1130/690
25 Gradeability at 1.6km/h    full/no load % 21/18
weights 26 Truck weight      kg 2550
27 Weight
distribution
full load front  kg 3580
rear  kg 470
28 no load front  kg 1110
rear  kg 1440
Chassis&Wheels 29 front wheel       6.50-10-10PR
30 rear  wheel       5.00-8-10PR
31 Wheelbase     mm 1425
32 Tread front   mm 890
rear   mm 900
33 Ground
clearence
At lowest point(mast)    mm 115
Frame   mm 105
34 Brake Service  brake     Hydraulic-foot pedal
Parking brake     Mechanical-hand lever
Drive Line 35 Battery Voltage/capacity      12/80
36 Engine  Model      ISUZU C240
Rated power    kw/rpm 34.3/2500
Rated torque   Nm/rpm 138/1800
Number of cylinders     4
Displacement   L 2.369
37 Fuel tank capacity     L 50
38 Transmission Speed forward/backward     1-1 power shift T/M 
39 Operating pressure Hydraulic system pressure   Kg/cm² 180

 

0.1191s