液化气叉车

  Home > Products > 液化气叉车

3.5 吨液化气叉车

           
Features 1 Manufacturer     LTMA
2 Model   Power shift T/M FG35
Manual shift T/M FG35
3 Load capacity   kg 3500
4 Load center   mm 500
5 Power unit     Gasoline
6 Operator type     Driver/seat
7 Tire type Front/rear   Pneumatic
8 Wheel Front/rear   2/2
Dimension 9 Max. lifting height   mm 3000
10 Free lift   mm 150
11 Fork size L*W*T mm 1070*125*50
12 Tilt range Mast forward/backward deg 6/12
13 Overall length(without fork)   mm 2720
14 Total width   mm 1285
15 Mast height (fork lowering)   mm 2075
16 Overall height fork raised With backrest mm 4250
17 Height to head guard   mm 2140
18 Turning radius(outside)   mm 2460
19 Front face of fork to front axle   mm 485
20 Min. right angle stacking aisle   without load length&clearance mm 2940
Performance 21 Speed Max Travelling full/no load km/h 18/19.5
22 Lifting full/no load mm/s 450/500
23 Lowering full/no load  mm/s 450/420
24 Max.drawbar pull Power shift T/M full/no load kg 1800/1000
Manual shift T/M full/no load kg 1900/1000
25 Gradeability at 1.6km/h Power shift T/M full/no load % 17/20
Manual shift T/M full/no load % 17/20
Weight 26 Truck weight   kg 4610
27 Weight  distribution Full load front/rear kg 7260/850
28 No load front/rear kg 1840/2770
Frame 29 Tires Number front/rear 2/2
30 Model front axle 28x9-15-12PR
31 rear axle 6.50-10-10PR
32 Wheelbase   mm 1700
33 Tread Front/rear mm 1060/970
34 Ground clearance At lowest point(mast) mm 120
Frame mm 135
35 Brake Service  brake   Hydraulic-foot pedal
Parking brake   Mechanical-hand lever
Engine 36 Battery Voltage/capacity V/AH 12/60
37 Engine Model   Nissan K25
Rated power PS(kw/rpm) 51/2300(37.4/2300)
Rated torque kg-m    max.(N.m) 18/1600(177/1600)
Number of cylinders   4
Displacement L 2.488
Fuel tank capacity L 70
38 Transmission Speed forward/backward Power shift T/M Manual shift T/M 1-1 power shift T/M 2-2 power shift T/M
39 Operating pressure Hydraulic system pressure kg/cm² 180
0.1096s